Hardware Installation
Figure 57 Installing Cabinet Shelf
• Mount two captive nuts (A) ( Section 4.4 on page 41 ) at the chosen
position for the shelf.
• Fasten the two slides (G) to the two captive nuts in the cabinet using the
two screws (C) and then loosen the screws.
• Loosen the four screws (F) slide the two fixing brackets (E) against each
other on the shelf and push the shelf (D) into the two slides (G).
• Slide the two fixing brackets (E) outwards behind the two screws (C), then
tighten the four screws (F).
• Finally fasten the shelf (D) by tighten the two screws (C).
4.14 Labeling
This section describes label handling of the system.
77
6/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...