Hardware Installation
4.2.8.2 Fastening Cabinets Side-by-Side
Table 10 Mounting Set, Side-by-Side
14/BYB 501, Mounting Set, Side-by-Side
Pos. Title/Function Product Number Quantity
A PLATE SXA 123 0368/1
3
B SCREW M 6X10 24/SBF 228
060/0100
12
Figure 23 Fastening the Cabinets Side-by-Side
1. Position the two cabinets side-by-side, Page 37
2. Adjust the two cabinets to an equal level.
3. Fasten the two cabinets together side-by-side with three plates (A) and
twelve screws (B) at the top, the middle, and the bottom of the two cabinets,
Page 37
4. Verify that the torque of all mounting screws is set to 5 Nm
+
/- 0.5 Nm.
4.3 Earthing the Cabinets
MX-ONE must be multi-point grounded.
Use the following material sets to ground the BYB 501 cabinets:
37
6/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...