Installing MX-ONE
• Fasten the Compact SM to the four captive nuts in the cabinet, using the
four screws (C), Page 75 .
• If necessary, and if there is space available, install additional Compact
SMs directly above the first one in the next available cabinet position. No
gap is needed between the units.
4.13 Installing a Cabinet Shelf
This section describes the installation of a cabinet shelf in the cabinet.
Note: The cabinet shelf is optional, and could be used for a portable computer.
Table 29 Cabinet Shelf
86/BYB 501/2 Cabinet Shelf
Pos. Title/Function Product Number Quantity
D SHELF SXA 210 44/2
1
E FIXING BRACKET (factory
mounted)
SXA 123 0417/1
2
F SCREW M 4X8 (factory mounted) 24/SBF 228 040/0080
4
G SLIDE SXA 123 0320/2
2
A CAPTIVE NUT M 6 SBM 173 060/03
2
C SCREW M 6X16 03/SBA 121
060/0160
2
To install the cabinet shelf Page 77 and perform the following steps:
76
6/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...
