Installing MX-ONE
4.7 Installing the DC/AC Inverter
This section describes the installation of a DC/AC inverter in the cabinet. Note
that Aastra does not supply this unit. Therefore, the illustration below refers to
an optional model that can be placed in the BYB 501 cabinet.
Use the following mounting set to install the inverter in the cabinet:
Table 20 Mounting Set for DC/AC Inverter
NTM 144 264 Mounting set
Pos. Title/Function Product Number Quantity
C SCREW M 6X16 78/SBA 121
060/0160
4
A CAPTIVE NUT M6 SBM 173 060/03
4
54 6/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...