Installing MX-ONE
1.3.2 Electrical Connections
Installation procedures involving connection of power cables and batteries must
be performed according to local regulations.
1.3.3 Safety
All personnel involved in installation must read and understand the safety
instructions prior to installation, see the description for SAFETY.
1.3.4 Site Planning
The MX-ONE should be installed in a room prepared for the system. For
information on site preparation, see the environmental spec for MX-ONE SITE
PLANNING.
1.3.5 Grounding and Earthing
In this document the expressions grounding and earthing have the same
meaning.
2
6/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...