Abarth 500e - Intelligent Speed Assist

STARTING AND DRIVING
152
The navigator tells the system of the
unit of measurement in force in the
country in which you are travelling and
converts the value consistently with the
unit of measurement selected by the
user. In this way, the speed limitation
suggested by the ISA system or the
speed offered by the IACC system will
always be correct, regardless of the
unit of measurement chosen by the
user.
The system can display the shape of
the signs consistently with the current
shape of the country in which you are
travelling.
Using the information contained in the
navigator, the system can recognise
motorway, urban and non-urban
scenarios and to use the limits
provided by the navigator to provide
the most plausibly accurate speed limit.
In addition, the system can recognise
turns and provide, where necessary,
the limit detected by the navigator
in place of that recognised by the
camera.
INTELLIGENT SPEED
ASSIST
The "Intelligent Speed Assist" system
can be used to set a speed limit on
the "Speed Limiter" system equal to
the one detected on the road signs by
means of the "Traffic Sign Recognition"
system, signalled to the driver on the
instrument panel display. The minimum
speed that can be set is 30 km/h (20
mph).
The "Intelligent Speed Assist" system
can be activated if the following
systems are active:
Speed Limiter (see the chapter in this
section)
Traffic Sign Recognition (see the
chapter in this section)
When the "Intelligent Speed Assist"
system recognises a new road sign,
it will suggest the new speed limit to
the driver with a specific message and
dedicated alerts depending on whether
the road sign is higher (fig. 143) or
lower (fig. 144) than the current speed
stored by the Speed Limiter. Consider
both unconditional speed limits and
those valid in rain, snow or fog to be
valid for speed limitation.
90
70
km/h
km
D
POWER
123456
C
23°
km
RANGE
216
75
%
90
143 F0S1187
70
90
km/h
km
D
POWER
123456
C
23°
km
RANGE
216
75
%
70
144 F0S1188
You can confirm by pressing the
RES button the speed limit setting
equal to the suggested sign. Once the
speed limit provided by the "Traffic
Sign Recognition" system has been
acquired as the new Speed Limiter
value, the activation of Intelligent Speed
Assist is indicated by the symbol
on the display and the relevant road
sign is shown surrounded by green.