IN AN EMERGENCY
188
HAZARD WARNING
LIGHTS
Press button (A) fig. 183 to switch the
hazard lights on/off regardless of the
position of the ignition device. With the
device on, warning lights and light
up in the instrument panel. Press the
button (A) again to switch the lights off.
183 AB0A0577
WARNING The use of hazard warning
lights is governed by the highway
code of the country you are driving in:
comply with legal requirements.
Emergency braking
In the event of an emergency
braking, the hazard warning lights
switch on automatically together
with warning lights and on the
instrument panel. The lights switch off
automatically when emergency braking
ceases.
ASSIST CALL
The car is equipped with an on-board
assistance function designed to provide
support in the event of malfunctions of
the car.
The ASSIST function is activated:
automatically (where provided)
following malfunctions of the braking
system system, motor, etc.
manually, by pressing the ASSIST
button (B) fig. 184 (where provided)
located on the ceiling light or via the
"Assist" app (A) fig. 185 present on the
Uconnect™ system (where provided).
For more information, refer to the
"Apps" paragraph in the "Uconnect™"
chapter of the "Multimedia" section.
184 AB0A0534
185 AB0A0597
The ASSIST function is activated with:
ignition device in the ENGINE
position;
ignition device in STOP position and
Uconnect™ system display on.
Once activated automatically (where
provided) or manually by pressing the
corresponding button, the ASSIST
function will send the position data of
the car to the Operations Centre and
stablish a voice call with an operator.
NOTE If the ASSIST function does
work, the fault in the system will be
indicated on the display. Go as soon
as possible to a Dealership to have the
function repaired.
NOTE The correct operation of the
ASSIST services will be guaranteed
only by a good network coverage.
WARNING The ASSIST function may
not be available for the first minute after
the car is started.
To Next Page
Loading...
