171
CHARGING SYSTEM FAILURE
Any faults during charging are displayed by the LEDs, either steady or flashing, located on the front of the charge status control
unit.
Refer to the table below.
GREEN LED RED LED
YELLOW
LED
Description Action/Consequence
1 OFF OFF OFF
Charging cable not connected to
the domestic charging port or
power failure in the domestic
power distribution system
2 ON OFF OFF
There are no faults in the
domestic power supply mains,
so the charging cable can be
connected to the charging
socket on the vehicle
3 ON ON (Flashing) ON
Overheating at the charging port
in the domestic power
distribution system
When the normal temperature is
reached, the system will make a
new charge attempt at a lower
current level.
4 ON OFF ON (Flashing)
Charging to a lower current level
due to overheating of the
charging port of the domestic
electricity distribution mains (see
point 3)
To Next Page
Loading...
