13
PROCEDURE FOR
CHARGING FROM A
DOMESTIC POWER SOCKET
(AC)
CHARGING PROCEDURE
2)
NOTE As soon as the plug is connected
to the domestic mains charging port, the
4 LEDs on the cable control unit (see the
description in the “Charge status control
unit” paragraph) will flash for approx. 2.5
seconds (control unit power-up phase).
IMPORTANT
2) The charging current level (“Level 1”/
“Level 2”/ “Level 3”, etc.) can only be
varied from the Uconnect
TM
system display
in Jeep/FIAT/ABARTH cars or the Alfa
Connect system display in Alfa Romeo
cars (see the description in the “Settings”
paragraph of the Uconnect
TM
online
supplement for Jeep/FIAT/ABARTH cars
or Alfa Connect online supplement for Alfa
Romeo cars). The default charge level set
is "Level 3". For the list of cable types, refer
to the “Mode2 cable variant table”.
To Next Page
Loading...
