MAINTENANCE AND CARE
210
SERVICE SCHEDULE
WARNING Once you have carried out the last intervention in the table, continue with the scheduled servicing, maintaining the
frequency indicated in the plan by marking each operation with a dot or dedicated note.
Warning: simply restarting the maintenance from the start of the plan may cause the allowed interval to be exceeded for some
operations!
Thousands of miles 9 18 27 36 45 54 63 72 81 90
Thousands of kilometres 15 30 45 60 75 90
105 120 135
150
Years 1 2 3 4 5 6 7 8 9 10
Check the tyre condition/wear and, if necessary, adjust the
pressure. Check the "Fix&Go” kit condition/expiry
Check operation of lighting system (headlights, direction indicators,
hazard warning lights, boot, passenger compartment, glove
compartment, instrument panel warning lights, etc.)
Check and, if necessary, top up fluid levels (high-voltage cooling,
brakes, windscreen washer, etc.) (1)
Check vehicle functions via diagnostic socket (vehicle control units,
high-voltage battery, etc.)
Check 12V battery with special instrument
Visually inspect the condition of: exterior bodywork, underbody
protection, pipes and hoses (brakes, climate control system, cooling
system), rubber parts (boots, sleeves, bushes, etc.)
Check windscreen/rear window wiper blade position/wear (where
provided)
Check operation of the windscreen wiper/washer system and adjust
nozzles, if necessary
To Next Page
Loading...
