MULTIMEDIA
276
with the Wi-Fi Hotspot service can
also use the radio-activated voice
service on-board the vehicle to
perform operations, such as checking
the weather or news, playing music,
interacting with the navigation system
and remotely controlling intelligent
devices in their home.
NOTE The hotspot name and
password can only be changed with
the ignition device in motor position
and the system in "READY" state (the
car is ready to go).
You can enrich your Uconnect Services
experience by purchasing optional
services for which a subscription is
required.
The services can be subscribed to
independently by the customer from
the catalogue of services available for
the car, directly on the personal page
of the official Abarth website.
My Alert: optional service with
app and web notifications in case
of suspected theft attempts and
assistance in case of theft.
DEACTIVATION OF
GEOLOCATION MODE
If you wish to deactivate geo-
location mode, simply do so from
the Uconnect™ system (see the
"Settings" menu of the Uconnect™
system for more details).
When geolocation mode is deactivated
some of the services on mobile apps
and web that use the location of the
car will not be available.
WARNING The icon at the top of
the Uconnect™ display indicates
that the geo-location function is
active (ON). When geolocation is on,
the car position is tracked to enable
the functions that require it. When
geolocation is off, the car position
is only tracked by the navigation,
safety, insurance and driver assistance
systems (where provided). See the
Uconnect™ system "Settings" chapter
to deactivate the function.
WARNING If the “default settings
are restored”, turn off the engine
(ignition device to STOP) and wait a
few minutes before restarting it (ignition
device to ENGINE). The incorrect
performance of the operation and the
short period of time passed between
turning off the engine and turning
it back on may cause the Privacy
settings to not be maintained. In this
case, repeat the operation, extending
the wait time between turning off the
engine and turning it back on.
UPDATING THE SYSTEM
Uconnect Services and the
Uconnect™ system application
software are updated remotely in order
to provide the customer with newer
software versions that include new
features or enhancements/enrichments
of features already offered.
Updates are made at the discretion of
FCA.
Some system updates will be
managed automatically, others will be
communicated to the Customer by
showing messages on the display
of the Uconnect™, allowing the
customer to confirm or postpone the
update itself.
The customer will be notified by the
Uconnect™ system if the system is
unavailable.
To read more about services, features,
specifications, availability and any
updates please always refer to the
content included in the official Abarth
website.
WARNING Some automatic system
updates could take place during a
phase of non-use, with the engine off.
This may require to switch the ignition
device from STOP to ENGINE and
back several times to re-establish all
audio and video functionality, .
To Next Page
Loading...
