ABB 2600T Series Short Form Instruction Manual

2 SOI/266-XC | 2600T Series Pressure transmitters 266 models
EN ISO 9001: 1994
ISO 9001: 2000
Cert. No. 9/90A
Cert. No. 0255
Short instruction manual
SOI/266-XC 2600T Series Pressure Transmitter
SUPPLEMENTARY DOCUMENTATION
For further information, please refer to the following documents:
DS/266XX_X
Pressure Transmitter Datasheets
DS/S26
Remote Seal Datasheet
IM/266
266 Pressure Transmitter Instruction Manual
IM/S26
Remote Seal Instruction Manual
All the addendum and other documents downloadable from
www.abb.com/pressure
ABB
The company
We are an established world force in the design and manufacture of instrumentation for industrial process
control, ow measurement, gas and liquid analysis and environmental applications. As a part of ABB, a world
leader in process automation technology, we offer customers application expertise, service and support
worldwide.We are committed to teamwork, high quality manufacturing, advanced technology and unrivalled
service and support.
The quality, accuracy and performance of the Company’s products result from over 100 years experience,
combined with a continuous program of innovative design and development to incorporate the latest technology.
The NAMAS Calibration Laboratory No. 0255(B) is just one of the ten ow calibration plants operated by the
Company, and is indicative of our dedication to quality and accuracy.
Use of instruction
Warning
An instruction that draws attention to the risk of injury or death.
Caution
An instruction that draws attention to the risk of damage to the
product, process or surroundings.
Note
Clarication of an instruction or additional information.
Information
Further reference for more detailed information or technical
details.
Although Warning hazards are related to personal injury, and Caution hazards are associated with equipment or property damage, it
must be understood that operation of damaged equipment could, under certain operational conditions, result in degraded process
system performance leading to personal injury or death.
Therefore, comply fully with all Warning and Caution notices.
CONTENTS
Section Page
ABB ...........................................................................................2
INTRODUCTION .......................................................................3
PRODUCT IDENTIFICATION ...................................................3
TRANSPORT ............................................................................4
HANDLING ................................................................................4
STORAGE .................................................................................4
SAFETY .....................................................................................4
INSTALLATION .........................................................................4
ELECTRICAL CONNECTION ...................................................6
WIRING .....................................................................................7
TRANSMITTER CONFIGURATION ..........................................7
HOW TO SET THE ZERO .........................................................9
HARDWARE SETTINGS .........................................................10
EASY SET-UP .........................................................................11
POSSIBLE INSTALLATION .....................................................12
DIAPHRAGM SEALS ..............................................................13
"EX SAFETY" ASPECTS .........................................................14
SAFETY MANUAL ...................................................................19
MANUFACTURING LOCATIONS
ABB SpA – ABB SACE Division
Via Statale 113
22016 Lenno (Co) – Italy
Tel: +39 0344 58111
Fax: +39 0344 56278
ABB Automation Product GmbH
Shillerstrasse 72
D-32425 Minden – Germany
Tel: +49 551 905534
Fax: +49 551 905555
ABB Inc.
125 E. County Line Road
Warminster, PA 18974 – USA
Tel: +1 215 6746000
Fax: +1 215 6747183
ABB Inc.
3450 Harvester Road
Burlington, Ontario L7N 3W5 – Canada
Tel: +1 905 639 8840
Fax: +1 905 639 8639
ABB Ltd.
14 Mathura Road
121003 Faridabad, Haryana – India
Tel: +91 129 2275592
Fax: +91 129 2279692
ABB Engineering (Shanghai) Ltd.
No. 5 Lane 369, Chusngye Road
Kangqiao Town, Nanhui District
Shanghai, 201319, P.R. China
Tel: +86 (0) 21 61056666
Fax: +86 (0) 21 61056677

ABB 2600T Series Specifications

General

Brand	ABB
Model	2600T Series
Category	Transmitter
Language	English