AC500 communication modules are required for
● a connection to standard fieldbus systems and
● for integration into existing networks.
AC500 communication modules
● enable communication on different fieldbuses.
● are mounted on the left side of the processor module on the same terminal base.
● are directly powered via the internal communication module bus of the terminal base.
A separate voltage source is not required.
The terminal base is needed for mounting and connecting the processor module and the
communication modules. The modules are plugged on the terminal base.
Terminal bases
AC500/S500: Short description hardware
2023/03/03 3ADR011074, 1, en_US 17
To Next Page
Loading...
