ABB AC500 V3 - Mounting and Demounting of the Terminal Blocks for Onboard I;Os

5.12.2 Mounting and demounting of the terminal blocks for onboard I/Os
Removable terminal blocks are used for power supply and for I/O connectors on AC500-eCo V3
processor modules PM50x2.
For option boards there are dif
ferent removable terminal blocks in spring version.
For the AC500-eCo V3 Basic CPUs a 3-pin terminal block for power supply and a 13-pin
terminal block for I/O connectors are used.
For the AC500-eCo V3 Standard CPUs and Pro CPUs a 3-pin terminal block for power supply,
a 13-pin terminal block and a 12-pin terminal block for I/O connectors are used.
For all CPUs there is a screw and a spring variant available.
Basic CPU Standard and Pro CPUs
Spring terminal
T
A5211-TSPF-B
Screw terminal
TA5211-TSCL-B
Spring terminal
TA5212-TSPF
Screw terminal
TA5212-TSCL
Various removable spring terminal blocks are available for option boards.
The following spare parts are available (depending on the number of pins).
Spring terminals
TA5220-SPF5 TA5220-SPF6 TA5220-SPF7 TA5220-SPF8
Intended pur-
pose
Mechanical planning and installation
Accessories for AC500-eCo > Mounting and demounting of the terminal blocks for onboard I/Os
2023/03/033ADR011074, 1, en_US54