Press the option board TA51xx (or TA5300-CVR) into the slot of the processor module
PM50x2 until it locks in place.
The option board must click into the slot of the processor module.
5.12.1.3 Removing the option board
1. Push the option board on the side to release the lock.
2.
At the same time, pull the option board out of the slot.
CAUTION!
Risk of injury and damaging the product!
Always plug in the option board slot cover when the option board is not inserted.
If the option board slot cover is lost, please order the replacement T
A5300-CVR
(1SAP187500R0001).
Never power up the CPU with uncovered option board slot, otherwise it may
cause serious injury and/or damage the product.
Mechanical planning and installation
Accessories for AC500-eCo > Mounting and demounting the option boards
2023/03/03 3ADR011074, 1, en_US 53
To Next Page
Loading...
