ABB AC500 V3 - Appendix; Diagnosis Messages Via Display of the Processor Module

—
14
Appendix
14.1 Diagnosis messages via display of the processor module
We recommend to read out the diagnosis messages within the engineering suite Automation
Builder or with the IEC application.
If the processor module has a display
, you can access the diagnosis system via the display and
the buttons.
Fig. 27: Example "battery is empty or missing"
Err 1 Total number of active diagnosis messages, here: 1
E4 bat Error severity, here: 4, and location of error, here: battery
Id 1 In the list of all errors, the position of the error, here: first error message
8, d1-d4 Error code, here: 8, and system information to identify the error with the help of the
diagnosis lists
Ä E2 Ä E3 Ä E4 Ä E11
Appendix
Diagnosis messages via display of the processor module
2023/03/033ADR011074, 1, en_US98