ABB AC500 V3 - Inserting and Removing a Memory Card

5.11.1 Inserting and removing a memory card
NOTICE!
Removal of the memory card
Do not remove the memory card during access.
Otherwise the memory card and/or files on it might get corrupted and/or normal
PLC operation might be disturbed.
1 Memory card
2 Micro memory card
3 Micro memory card adapter
4 Memory card slot
Insert the memory card into the memory card slot of the processor module until locked.
1 MC502 or MC5141 memory card
2 MC5102 micro memory card
3 Micro memory card adapter
4 Memory card slot
Mechanical planning and installation
Accessories for AC500 (Standard) > Inserting and removing a memory card
2023/03/03 3ADR011074, 1, en_US 51