ABB AC500 - Page 124

____________________________________________________________________________________________________________
G1 Introduction to AC500 1-122 AC500 / Issued: 07.2006
For AC1131 experts –
connection S500-FBP I/O module to series 90
Example with an AC31 Series 90 CPU as PROFIBUS DP Master and a DC505-FBP as
remote I/Os
DC532DC505 AX522
07 KT 98
BasicUnit
AdvantController31
RUN
STOP
COM2
COM1
PDA11-FBP.050
PDR11-FBP.150
DC505-FBP + DC532 + AX522
07 KT 97/98 DP
+/– 24 V DC
PDP22-FBP
+
–
24 V DC
+
24 V DC
PC
Figure: Example with an AC31 series 90 CPU as PROFIBUS DP master and a DC505-FBP as remote
I/Os
The following example will guide you through the installation and the configuration of a small PROFIBUS
DP fieldbus using an AC31 PLC as PROFIBUS DP Master and a S500-FBP remote I/O station with a
modular FBP.
This example could be used as starting point to realize your own application.
ATTENTION
Refer to the dedicated User's manuals or Installation guides of the
FieldBusPlug and the AC31 PLCs and programming software.