Transportation in the
protective package
Storage in the protect-
ive package
Operation installed
for stationary use
Requirement
Max. 95%Max. 95%5 … 95%Relative humidity
No condensation permitted. Maximum permitted relative humidity is 60%
in the presence of corrosive gases.
IEC 60721-3-2: 1997IEC 60721-3-1: 1997IEC 60721-3-3: 2002Contamination levels
(IEC 60721-3-x)
Class 2C2Class 1C2Class 3C2- Chemical gases
Class 2S2Class 1S3. (packing
must support this, other-
wise 1S2)
Class 3S2. No conduct-
ive dust permitted.
- Solid particles
--Pollution degree 2Pollution degree
(IEC/EN 61800-5-1)
--frequency
10 … 150 Hz;
Sinusoidal vibration
(IEC 60068-2-6, Test
Fc 2007-12) amplitude ±0.075 mm
(0.003 in),
10 … 57,56 Hz;
constant peak accelera-
tion 10 m/s2 (33 ft/s2),
57,56 … 150 Hz;
sweep: 1 oct/min;
10 sweep cycles in
each axis with STO
active;
uncertainty ±5.0%;
normal mounting
According to ISTA 1A.According to ISTA 1A.Not permittedShock/(IEC 60068-2-
27, ISTA 1A) Max. 100 m/s
2
(330 ft/s
2
), 11 ms.
Max. 100 m/s
2
(330 ft/s
2
), 11 ms.
76 cm (30 in)76 cm (30 in)-Free fall
Materials
Hot-dip zinc coated steel sheet 1.5 mm (0.06 in). Extruded aluminum
AlSi.
PC/ABS 2 mm (0.08 in), PC+10%GF 2.5 … 3 mm (0.10 … 0.12 in) and
PA66+25%GF 1.5 mm (0.06 in), all in color NCS 1502-Y (RAL 9002 /
PMS 420 C)
Drive enclosure
Corrugated cardboardPackage
Disposal
The main parts of the drive can be recycled to preserve natural resources and energy.
Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and precious metals
can be recycled as material. Plastics, rubber, cardboard and other packaging material
Technical data 147
To Next Page
Loading...
