7
Electrical installation – North
America
Contents of this chapter
This chapter describes how to:
• measure the insulation
• do an earthing system compatibility check
• change the EMC filter or ground-to-phase varistor connection
• connect the power and control cables
• install optional modules
• connect a PC.
Warnings
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or death, or
damage to the equipment can occur.
If you are not a qualified electrical professional, do not do installation or
maintenance work.
Required tools
To do the electrical installation, you need the following tools:
• wire stripper
Electrical installation – North America 87
To Next Page
Loading...
