￭ Layout
1. BAPO-01 module
2. Locking screw hole
3. Internal X100 connector
4. Internal X102 connector
5. Grounding rail
Mechanical installation
See the electrical installation instructions of the drive.
Electrical installation
Connect the external power supply to the +24 V and DGND terminals on the drive. See
the electrical installation instructions of the drive.
Do not chain an external 24 V DC power supply to several drives. Each drive must be
powered by a single 24 V DC power supply, or a separate 24 V DC output of one auxiliary
power source.
200 BAPO-01 auxiliary power extension module
To Next Page
Loading...
