ABB ACH480 Series - Type Designation Key; Basic Code; Option (Plus) Codes

Type designation key
The type designation contains information on the specifications and configuration of the
drive.
Sample type code: ACH480-04-12A7-4+XXXX
￭ Basic code
DescriptionCode
Product seriesACH480
Construction. 04 = Module, IP20 (UL open type)
When there are no options selected: cabinet optimized module, IP20 (UL open type),
ACH-AP-H assistant control panel, RIIO-01 I/O & EIA-485 module (BACnet MS/TP,
Modbus RTU, N2), Safe torque off, brake chopper, coated boards, quick installation
and start-up guide. For the IEC drive types also EMC category C2 filter.
04
Size. See the ratings table in the technical data.12A7
Input voltage.4
• 4 = 3-phase 380 … 480 V AC
￭ Option (plus) codes
DescriptionCode
Control panel and panel options
ACH-AP-H control panelJ400
RDUM-01 blank cover with RJ45 connection, for remote mounting of the control panelJ424
ACH-AP-W control panel with BluetoothJ429
Without control panel0J400
I/O options
BREL-01 relay output extension moduleL511
BIO-01 I/O extension module (front option, can be used with fieldbus)L515
BAPO-01 external 24 V DC power extension module (side option)L534
RIIO-01 I/O & EIA-485 module (front option, as standard)L540
Base unit without RIIO-01 I/O & EIA-485 module0L540
Fieldbus adapters
FDNA-01 DeviceNetK451
FPBA-01 PROFIBUS DPK454
FCAN-01 CANopenK457
FSCA-01 Modbus/RTUK458
FBIP-21 BACnet/IPK465
FECA-01 EtherCATK469
FEPL-02 Ethernet POWERLINKK470
FENA-21 2-port Ethernet (Ethernet/IP, Modbus/TCP, PROFINET)K475
FMBT-21 Modbus/TCPK491
36 Operation principle and hardware description