ABB ACH480 Series - Start-Up; Technical Data

24VDC (+)
GND (-)
+24V
DGND
BAPO-01
2
1
3
5
4
External power supply1
Drive2
+24 V internal3
Main power supply4
+5 V internal5
Start-up
To configure the BAPO-01 module:
1. Power up the drive.
2.
Set the parameter 95.04 Control board supply to 1 (External 24V).
Technical data
Voltage and current rating for the auxiliary power supply: +24 V DC ±10%, max.
1000 mA (including internal fan load).
Power loss: Power losses with maximum load 4 W.
BAPO-01 auxiliary power extension module 201