15
BIO-01 I/O extension module
Contents of this chapter
This chapter contains a description and technical data of the optional BIO-01 I/O
extension module.
Safety instructions
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or death,
or damage to the equipment can occur.
Hardware description
￭ Product overview
The BIO-01 option module (option +L515) is an I/O extension module to be used with
fieldbus adapter module. The BIO-01 module can be installed between the drive and
the fieldbus module.
The BIO-01 has three additional digital inputs (DI3, DI4 and DI5), one analog input (AI1)
and one digital output DO1 that is referred as DIO1 in the firmware (but works only in
output mode). You can use DI4 and DI5 as frequency inputs and DO1 as a frequency
output.
BIO-01 I/O extension module 203
To Next Page
Loading...
