Aztec 600 ISE ammonia and fluoride
Single-stream ion-selective analyzers 5 Operation
OI/AXM630–EN Rev. I 25
5.2.2 Numeric Editing
If the field to be edited requires a numeric value, a number-pad
is displayed:
To enter a number, use the , , and keys to highlight
the required number and press .
To finish, highlight 'OK' and press or press to exit
without making any changes.
The 'C' key cancels the edit operation and exits back to the
previous screen.
The 'Del' key executes the delete and backspace functions on
characters or digits entered in the text box
5.2.3 Other Methods of Editing
There are several other methods of editing, for example:
Checkboxes
To toggle the selection, use the and keys to highlight the
required checkbox and press .
To finish, highlight 'OK' and press to exit and save changes
or press to exit without making any changes.
Slider Bars
To select a value, use the and keys to move the slider.
To finish, press to exit and save changes or press to exit
without making any changes.
Tabs
To select a tab, use the and keys.
5.2.4 Menus
Press to open the menu and use the and keys to
select a menu item. Press to open the menu item:
5.3 Software Screen Structure
5.3.1 Indicator View Menus
When menus are accessed from the 'Indicator View', the
'Operate' and 'Diagnostics' menu options are displayed.
5.3.2 Chart View Menus
When menus are accessed from the 'Chart View', the 'Chart
Functions' and 'Statistics' menu options are displayed.
Note. The tab indicates that there are more tabs
available.
see Section 6, page 26
see Section 7, page 44
see Section 9, page 53
see Section 10, page 54
see Section 4.2, page 23
see Section 8, page 51
see Section 11, page 57
To Next Page
Loading...
