Aztec 600 ISE ammonia and fluoride
Single-stream ion-selective analyzers 12 Diagnostic Information and Icons
OI/AXM630–EN Rev. I 63
12.3.2 Alarm Event Log – Icons 12.3.3 Status Icons
Note.
A flashing red alarm icon indicates an active and
unacknowledged alarm.
A continuous red alarm icon indicates an active and
acknowledged alarm.
Icon Event
High process alarm – active / inactive
Low process alarm – active / inactive
High latch alarm – active / inactive
Low latch alarm – active / inactive
High annunciate alarm – active / inactive
Low annunciate alarm – active / inactive
Clean-in-progress alarm – active / inactive
In sample alarm
Out of sample alarm
Daylight saving start / end changed
Alarm acknowledged
Operator message
Note. Status icons are displayed in the Status Bar – see
Fig. 2.1, page 8.
Icon Event
Historical review active
External archive media on-line with % used
indication
External archive media off-line with % used
indication
External archive media not inserted
(yellow flashing exclamation mark)
Media update in progress. Do not remove media
while this symbol is displayed
External media 100% full, archiving stopped
(green / grey icon, flashing white cross)
Warning! Too many files (green icon – media
online, grey icon – media offline)
To Next Page
Loading...
