Aztec 600 ISE ammonia and fluoride
Single-stream ion-selective analyzers 10 Diagnostics
54 OI/AXM630–EN Rev. I
10 Diagnostics
10.1 Monitor Status
There are four tabs in the Monitor Status screen:
10.1.1 Status
Note. The 'Diagnostics' menu can be accessed only from the 'Indicator View’ screen.
Fig. 10.1 User Diagnostic Screens
Fields Description
Current State Displays the current state of the analyzer (for example, Measuring, Calibrating, Off).
Sample Conc. / Millivolts
Sample Concentration is the current estimated concentration, derived from the raw electrode
signal. This is displayed only when there is a valid calibration.
Cell Temperature The current recorded cell temperature.
see Section 10.1, page 54
see Section 10.2, page 56
see Section 10.3, page 56
see Section 10.4, page 56
To Next Page
Loading...
