ABB Aztec 600 - Exiting Configuration Level

Aztec 600 ISE ammonia and fluoride
Single-stream ion-selective analyzers 6 Configuration
26 OI/AXM630–EN Rev. I
6 Configuration
Fig. 6.1 System Configuration
Valid Password
Entered
Configuration Level
Protected
Invalid Password
Entered
Configuration Level
Unprotected
Displayed only if 'Security
system' parameter is set to
'Basic' – see on-line help
system
Edit the current configuration. Changes are not
implemented until saved on exit from Configuration
Open a configuration saved previously to internal
or external storage (up to 16 configurations can be
stored in internal memory – see Note 1 overleaf
Cancel
Toggle Between
Internal / External
Storage
Accept
Selection
Open a new
configuration with
the default settings –
see Note 1 overleaf
Cancel and Return
to 'Operator' Level
See Note 2
overleaf
Displayed only if 'Security
system' parameter is set to
'Advanced' – see on-line
help system