Aztec 600 ISE ammonia and fluoride
Single-stream ion-selective analyzers Appendix E – Web Server
OI/AXM630–EN Rev. I 85
Appendix E – Web Server
The analyzer is fitted with an ethernet card as standard and,
when the appropriate configuration settings have been made,
users can access the analyzer's data via an Ethernet network.
In addition, files can be transferred to and from the analyzer via
an FTP connection.
a Log On – click to log on to the analyzer to enable
configuration access (displayed only if the analyzer is
configured for FTP access – see Section 6.7.1, page 41).
b Analyzer View – displays the current screen of the
analyzer. If the analyzer has a screen-saver set, it does not
affect this view.
c Access Buttons – provides access to the analyzer's data
if the user has the appropriate access permission.
– Stream Values – see Appendix E.1, page 86
– Operate – see Appendix E.2, page 86
– Monitor Status – see Appendix E.3, page 86
– Statistics – see Appendix E.4, page 86
– Logging Status – see Appendix E.5, page 86
– Operator Message – see Appendix E.6, page 86
– Configuration – see Appendix E.7, page 87
d Language Selection – selects the language for the web
pages.
e Auto-Refresh – updates the analyzer view automatically.
f View Selection – selects the required analyzer view:
–Alarm/Event Log
– Audit Log
–Chart View
– Bar View
Fig. E.1 Web Server Screen
1
6
3
4 5
1
To Next Page
Loading...
