ABB Aztec 600 - Page 76

Aztec 600 ISE ammonia and fluoride
Single-stream ion-selective analyzers 15 Specification – Aztec ISE Fluoride
74 OI/AXM630–EN Rev. I
Mechanical data
Ingress protection
IP31**
Sample connections
Inlet:
 6 mm OD x
1
/4 in BSP push-fit elbow
Outlet:
 10 mm OD x
3
/8 in BSP push-fit elbow
Dimensions
Height:
 653 mm (25.7 in)
Width:
 366 mm (14.4 in) max.
Depth:
 183 mm (7.2 in) door closed
 430 mm (16.9 in) door open
Weight:
 15 kg (33 lb)
Materials of construction
Electronics enclosure:
 10 % glass-loaded polycarbonate
Main enclosure:
 Noryl
Lower tray:
 20 % glass-loaded polypropylene
Door:
 Acrylic
** Not evaluated for UL or CB
Electrical
Power supply ranges
 100 to 240 V max. AC 50 / 60 Hz ± 10 %
(90 to 264 V AC, 45/65 Hz)
 18 to 36 V DC (optional)
Power consumption
75 W max. – AC
100 W max. – DC
Analog outputs
6 isolated current outputs, fully assignable and programmable over a
0 to 20 mA range (up to 22 mA if required)
Alarms / relay outputs
One per unit:
 Stop relay
 Attention relay
 Failure relay
 Calibrate relay
Six per unit:
 Fully user-assignable alarm relays
Rating
Voltage:
 250 V AC
 30 V DC
Current:
 5 A AC
 5 A DC
Loading (non-inductive):
 1250 VA
 150 W