EasyManua.ls Logo

ABB CONCEPTPOWER CLASSIC DPA-50 - Options; SNMP Card; Wavemon Management Software

ABB CONCEPTPOWER CLASSIC DPA-50
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section-10
04-3008_S10_ABB_TDSCPDPA-S2_GB_121202 Page 13/19 ABB
Printed in Switzerland – Modifications reserved
10.9 OPTIONS
- SNMP card and WaveMon Management Software , Modbus Protocol
- External Battery Cabinets
- Parallel bus for additional frames
- In/Output Transformator for special voltages
- Temp. sensor for battery temp. control
10.9.1 SNMP card / WaveMon Management Software
The Simple Network Management Protocol (SNMP) is a worldwide-standardized communication-protocol. It is used
to monitor any device in the network via simple control language. The UPS-Management Software WaveMon also
provides its data in this SNMP format with its internal software agent. The operating system you are using must
support the SNMP protocol. We offer our WaveMon software with SNMP functionality for Novell, OS/2, all Windows
running on INTEL and ALPHA, DEC VMS, Apple.
Two types of SNMP interfaces with identical functionality are available: an external SNMP-Adapter (Box) and an
internal SNMP-Card. Both can manage a parallel system (N modules) and return either global values - which are
consistent for the whole parallel system - or specific values from the single modules.
Internal SNMP-Card
UPS
Ethernet
9
External SNMP-Adapter

Table of Contents

Related product manuals