Section-1
04-3008_S1_ABB_OPMCPDPA-S2_GB_121202 Page 10/22 ABB
Printed in Switzerland – Modifications reserved
1.3.4 Single/Parallel-Modules operation
The Conceptpower DPA
TM
S2 has unique paralleling features. We distinguish: Single or Parallel-Modules
A) Single-Module
CLASSIC DPA-50 TRIPLE DPA-150 UPGRADE DPA-250 1 single module
If a configuration consists of one single Module it is defined as a Single-Module Configuration even being in
different cabinets like CLASSIC DPA-50, TRIPLE DPA-150, UPGRADE DPA-250 with a single Module.
B) Parallel-Module:
TRIPLE DPA-150
A Parallel-Module is a Module that is operating in parallel with other equivalent Modules, but still within the same
cabinet (e.g. TRIPLE DPA-150) using the DPA technology
1.3.5 Single/Multi-Cabinet Configurations
Single-Cabinet Configuration:
A single-cabinet configuration means, that there are no cabinets operating in a chain.
Multi-Cabinet Configurations:
It is possible to parallel Conceptpower DPA
TM
S2 CLASSIC DPA-50,
TRIPLE DPA-150, UPGRADE DPA-250 Cabinets into a Multi-Cabinet Configuration
(including total up to 30 Modules) in order to increase the number of paralleled Modules.
+
+
To Next Page
Loading...
