ABB CONCEPTPOWER CLASSIC DPA-50 - Installation Checklist

Section-1
04-3008_S1_ABB_OPMCPDPA-S2_GB_121202 Page 21/22 ABB
Printed in Switzerland – Modifications reserved
1.6.2 Installation Checklist
 All packing materials and restraints have been removed from each cabinet.
 Each cabinet in the UPS system is placed in the installed location.
 All conduits and cables are properly routed to the UPS and auxiliary cabinets.
 All power cables are properly sized and terminated.
 A ground conductor is properly installed.
 If the cabinet does not use all module mounting locations, the provided protective covers are
installed on the front and back of the cabinet.
 Battery cabinet installation instructions have been completed.
 Air conditioning equipment is installed and operating properly.
 The area around the installed UPS system is clean and dust-free. (It is recommended that the UPS
be installed on a level floor suitable for computer or electronic equipment.
 Adequate workspace exists around the UPS and other cabinets.
 Adequate lighting is provided around all UPS equipment.
 Any optional accessories are mounted in their installed location and properly wired.
 Summary alarms and/or building alarms are wired appropriately. (OPTIONAL)
 Startup and operational checks performed by authorized service personnel.
 All network connections are completed.