Section-2
04-3008_S2_ABB_OPMCPDPA-S2_GB_121202 Page 13/16 ABB
Printed in Switzerland – Modifications reserved
2.3.2 EXTERNAL BATTERY CABINET AND BATTERY CONNECTION
WARNING!
KEEP OUT OF BATTERY POLES WHICH CONTAIN DANGEROUS DC-
OLTAGES
CAUSING FATAL ACCIDENTS.NOTE:
MANIPULATION ON THE BATTERY SYSTEM SHOULD ONLY BE DONE BY
TRAINED SERVICE AND MAINTENANCE PERSONEL OF THE MANUFACTURER
OR HIS AUTHORISED SERVICE PARTNERS. INAPPROPRIATE MANIPULATIONS
OF THE BATTERIES CAN CAUSE LIGHTNING SPARKS. WHILE OPERATING ON
BATTERY SYSTEMS IT IS MANDATORY TO WEAR GLASSES.
2.3.2.1 External Battery Configuration
In the UPS-cabinet of the Conceptpower DPA
TM
S2 UPGRADE DPA 250 there is no space provided for
batteries.
There are 2 external matching battery cabinets available:
CBAT DPA-120 for Separate or Common battery configurations of 24Ah or 28Ah blocks (max. 120 Blocks)
CBAT DPA-200 for Separate or Common battery configurations for 24Ah or 28Ah blocks (max. 200 Blocks)
S-type = For Separate. Battery
C-type = For Common. Battery
CBAT-DPA-120
S-type or C-type
CBAT-DPA-200
S-type or C-type
BATTERY FRAMES
Configuration accommodates:
Max.
120 Batt. block x 24Ah/28Ah
on 8 shelf
3x5=15 blocks/shelf
200 Batt. blocks x
24Ah/28Ah
on 7 shelf
6x5=30 blocks/shelf
Battery fuses / Max. Batt. Strings :
Terminals :
S-type
3 / 3
(Terminal 9 x 16/25mm2)
5 / 5
(Terminal 15 x 16/25mm2)
Battery fuses / Max. Batt. Strings
Terminals :
C-type
3 / 3
+ Com. Connection Bar
3 x (2xM8) +PE 2xM8
5 / 5
+ Com. Connection Bar
3 x (2xM10) +PE 2xM10
Fuse Type (Very Fast acting)
A 3x100 A 5x100A
Dimensions (WxHxD)
mm 730x1975x800 1200x1975x800
Weight with trays and w/o
batteries
kg 290 410
For detailed information and layout of the battery cabinets please refer to section 10 / Options
To Next Page
Loading...
