ABB Conceptpower DPA 500 - Conceptpower Dpatm 500 Basic System Configuration

04-3275_OPM_ABB_CONCEPTPOWER_DPA_500kW_EN_REV-A.docx Page 10/78 ABB
Modifications reserved
2.5 CONCEPTPOWER DPATM 500 BASIC SYSTEM CONFIGURATION
The UPS system is housed in single freestanding cabinet. The cabinets line up and match in style and colour, and
have safety shields behind the doors for hazardous voltage protection. Following configurations are possible of single
cabinet configuration:
Table 4: single cabinet configuration possibilities.
Nominal power 100kW Nominal power 200kW
Nominal power 300kW Nominal power 400kW
Nominal power 500kW