04-3275_OPM_ABB_CONCEPTPOWER_DPA_500kW_EN_REV-A.docx Page 9/78 ABB
Modifications reserved
2.4 TYPE PLATE AND MODEL IDENTIFICATION
The type plate shown in Figure 1 here below is positioned on the internal side of the UPS door in a center position.
It contains the basic electrical characteristics as well as, product name, serial number and production date. The
identification table (Table 2) helps to crosscheck the Type (first part of the serial number) with the UPS model.
Figure 1: type plate of Conceptpower DPA 500.
Table 2: identification table with dimensions of Conceptpower DPA 500.
TYPE UPS MODEL
Dimensions w/o
packaging in mm
Dimensions with std.
packaging in mm
Dimensions w/
wooden box in mm
To Next Page
Loading...
