ABB Conceptpower DPA 500 - Page 29

04-3275_OPM_ABB_CONCEPTPOWER_DPA_500kW_EN_REV-A.docx Page 29/78 ABB
Modifications reserved
Figure 12: Customer interface board
1
2
3
8
6
4
9
10
11
12
13
5
1 Modem Slot for optional Modem/Ethernet card ONLY
2 SNMP Slot for optional SNMP card ONLY
3 JD1 RS232 Sub D9/female PC / laptop connection
4 USB PC / laptop connection
5 2 LED’s green/red LED showing the status of the interface board
6 JR3 Graphical display connection
7 SW2 DIP-SWITCH for Multidrop configuration
8 JR2 (RJ 45) Multidrop connection (multi-cabinet configuration)
9 X3 UPS inputs and 12VDC source (X3 5/6)
10 X2 UPS outputs dry ports (potential free contacts)
11 X1 Interlock Function
12 SW1-6 Multi-cabinet Configuration switch (see 5.1.6 and 6.1.2.4)
13 JD8 Parallel BUS connector
ONLY For paralleling cabinets use optional adapter:
JD5 Parallel BUS - Input Connector
JD6 Parallel BUS - Output Connector
7
Parallel
Adapter
JD 5
SW2-2
JD6