Product name principles
General
The different robots have a wide range of options. In many cases the option name
gives a good explanation of its content. In some cases there is a need to add more
information in the product name in order to clearly show a certain variant and to
avoid misunderstandings. Hence a complementary naming standard is used.
The family name of the options is DressPack (that is customer cables and hoses
from the controller to the robot’s axis 6, divided in different sections).
DressPack parts
DressPack parts that are assembled on the robot are called:
• IRBDP (IRB DressPack)
Main application
The DressPack has been prepared for two main applications:
ApplicationProduct name
Material handlingMH
Spot weldingSW
Generations
The different generations of a DressPack is indicated with a generation number.
The number indicates the different design of each generation. (Some generations
might not be available since it has been phased out).
• 1, 2, 3 etc
Sections
The DressPack on the robot is supplied in different sections:
SectionProduct name
Lower DressPack sectionL
Upper DressPack sectionU
Continuous DressPackC
(DressPack without an intermediate connection point)
Routing
The DressPack can be routed in different ways:
RoutingProduct name
Integrated DressPackI
The main parts are integrated within the robot structure.
External DressPackE
The main parts are routed outside, on the robot structure.
Continues on next page
14 Product manual - DressPack/SpotPack IRB 8700
3HAC055802-001 Revision: B
© Copyright 2015-2017 ABB. All rights reserved.
Product name principles
To Next Page