4.2.5 Replacing the protection hose IRBDP SW6 UI and IRBDP MH6 UI LeanID
Location of protection hose, upper arm
The protection hose upper arm is located as shown in the figure.
xx1500003061
Protection hose, front partA
Protection hose, back partB
Spare parts
NoteArticle numberWear parts
See Wear parts on page 244Protection hose, upper arm,
front part (1,150 mm)
Protection hose, upper arm,
back part (745 mm)
Required equipment
NoteArticle numberEquipment, etc.
Content is defined in section
Standard toolkit on page 233.
-Standard toolkit
Consumables
NoteArticle numberEquipment
Optitemp RB23HAC14807-1Cable grease
Continues on next page
202 Product manual - DressPack/SpotPack IRB 8700
3HAC055802-001 Revision: B
© Copyright 2015-2017 ABB. All rights reserved.
4 Repair
4.2.5 Replacing the protection hose IRBDP SW6 UI and IRBDP MH6 UI LeanID
To Next Page