ABB DressPack - 3.4 Cleaning activities

3.4 Cleaning activities
3.4.1 Cleaning, DressPack upper arm
Required equipment
NoteArt. no.Equipment
The contents are defined in section
Toolkits, DressPack/SpotPack on page 233.
3HAC17290-7Standard Toolkit,
DressPack/SpotPack
For cleaning the protective hose ribs.Dry rag and medium soft brush
Cleaning
The procedure below details how to clean the DressPack upper arm.
NoteAction
Only use equipment and cleaning agents
as specified in section Required equip-
ment on page 140.
Clean the DressPack upper arm exterior, in
order to avoid filling up the spaces between
the ribs with debris. Make sure to clean any
areas where any hoses bend or rub against
the robot.
If the harness is not cleaned sufficiently,
breakage of the protective hose may result.
1
Clean the slide sleeves of any sort of con-
tamination.
2
148 Product manual - DressPack/SpotPack IRB 8700
3HAC055802-001 Revision: B
© Copyright 2015-2017 ABB. All rights reserved.
3 Maintenance
3.4.1 Cleaning, DressPack upper arm