ABB DressPack - Risk of Disabling Function Reduced Speed 250 MM;S

1.2.5.5 Risk of disabling function "Reduced speed 250 mm/s"
Note
Do not change Transm gear ratio or other kinematic system parameters from
the FlexPendant or a PC. This will affect the safety function "Reduced speed 250
mm/s".
Product manual - DressPack/SpotPack IRB 8700 35
3HAC055802-001 Revision: B
© Copyright 2015-2017 ABB. All rights reserved.
1 Safety
1.2.5.5 Risk of disabling function "Reduced speed 250 mm/s"