3.4.4 Cleaning the Weld timer cooling fins
Overview
Use this procedure to clean the weld timer cooling fins.
Location
xx0500002240
Attachment screws M5x9 Fastite screw (3 pcs)A
Fan casingB
Cooling finsC
Required equipment
NoteArt.no.Equipment
The contents are defined in section
Toolkits, DressPack/SpotPack on page 233.
3HAC17290-7Standard toolkit
DressPack/SpotPack
Vacuum cleaner
Continues on next page
Product manual - DressPack/SpotPack IRB 8700 153
3HAC055802-001 Revision: B
© Copyright 2015-2017 ABB. All rights reserved.
3 Maintenance
3.4.4 Cleaning the Weld timer cooling fins
To Next Page