ABB DressPack - Page 231

Water and air connectors
The following table specifies the recommended standard tightening torque for
water and air connectors when one or both connectors are made of brass. Any
special torque specified in the repair, maintenance or installation procedure
overrides the standard torque!
Tightening torque Nm -
Max.
Tightening torque Nm -
Min.
Tightening torque Nm -
Nominal
Dimension
158121/8
2010151/4
2515203/8
5030401/2
9055703/4
Product manual - DressPack/SpotPack IRB 8700 231
3HAC055802-001 Revision: B
© Copyright 2015-2017 ABB. All rights reserved.
6 Reference information
6.3 Screw joints
Continued