Check of protective sleeve
The protective hose is protected against wear in exposed areas with a protective
sleeve.
NoteAction
xx1400000224
In order to be sure that the protective
sleeve is in the correct position, check the
position after some hours running.
1
If the protective hose is worn somewhere,
adjust the position of the protective sleeve.
2
Product manual - DressPack/SpotPack IRB 8700 83
3HAC055802-001 Revision: B
© Copyright 2015-2017 ABB. All rights reserved.
2 Installation
2.4.3.2 Fitting the cable package IRBDP MH3 UI
Continued
To Next Page
Loading...
