FOXCST REFERENCE
34 FOX61xLEDE1
8.3 AP: / unit-x / port-y
8.3.1 AP: / unit-x / port-y, Overview
For a description of the
“Overview - Alarms”, and
“Overview - Cross Connections”
management functions, please refer to "1KHW002466 FOXCST Operation".
8.3.2 AP: / unit-x / port-y, Main
8.3.2.1 AP: / unit-x / port-y, Main - General
For a description of the
“Main - General”
management function, please refer to "1KHW002466 FOXCST Operation".
NSW No Application Soft-
ware
Equipment
Alarm
Major There is no application ESW installed on
the unit, or the application ESW has not
yet finished its boot process.
UNAS Unit Not Assigned Equipment
Alarm
Warning The unit is not assigned and cannot be
configured. To assign the unit, execute
the “Assign” command in the “Main”
function of the unit.
UIC Unit Incompatible Equipment
Alarm
Major The inserted unit is not compatible with
the assigned unit.
PWRSVE Battery Power Saving Equipment
Alarm
Critical Power saving is active on the unit, i.e. it
is kept in the “reset” state during battery
power backup.
Table 8: AP: / unit-x, Fault Management (continued)
ID Fault Cause Event Type Traffic
Affecting
Default
Severity
Description
To Next Page
Loading...
Need help?
General
