FOXCST REFERENCE
38 FOX61xLEDE1
The “Usage” parameter is read-only.
For more information regarding quality level handling please refer to
"1KHW002467 FOX61x TDM Services".
8.3.3.3 AP: / unit-x / port-y, Configuration - Channels
“Create Channel” and “Create Multiple Channels” dialogues:
The “Create Advanced Channel” command displays the created channel:
“Delete Channel” dialogue:
Table 12: AP: / unit-x / port-y, Configuration - Synchronization
Operation Name Parameter Name Range Description / Details
Create Channel … Open the FOXCST dialogue to create one or
more channels. A channel is a connection termi-
nation point (CTP) used as a starting or ending
point of a cross connection.