FOXCST REFERENCE
FOX61xLEDE1 47
8.4.5.1 AP: / unit-x / port-y / chan-z, Performance Management - Protection
8.4.6 AP: / unit-x / port-y / chan-z, Status
8.4.6.1 AP: / unit-x / port-y / chan-z, Status - Maintenance
8.4.6.2 AP: / unit-x / port-y / chan-z, Status - CTP
Alarm 24h no
Table 21: PM counter interval availability (continued)
Counter interval Protection
Table 22: PM group: Protection
PM parameter Description
Switch-Over The protection switch-over count gives information
about the number and distribution of protection
switching events.
Table 23: AP: / unit-x / port-y / chan-z, Status - Maintenance
Operation Name Parameter Name Range Description / Details
Loop Status State None
Deactivate any loop.
Front To Front
Activate the Front-to-front loop.
For more information refer to section "Loops"
(page 28).
To Next Page
Loading...
Need help?
General
