Meters
The menu allows to have access to the information briefly listed below together with the buttons you can
use. It is possible to use Selection Filter and Sort Function on Node, Group, Type, Speed and Status labels
to find desired values. It is also possible to add new meters by own defined ID number and to change the
ID number.
Buttons
Add
Slave ID Assign an ID number (between 1 and 16)
Baud rate Select the baud rate among the ratings (from 2400 to 115200)
Bytesize Select the Byte size among the ones available (7, 8 or 9)
Parity Select the parity among the ones available (none, odd, even)
Stop bits Select the Stop bit among the ones available (1 or 2)
Type Select between 1 phase or 3 phase
Meter name Set the name of the meter (max xxx characters)
Serial number Insert the Serial Number of the meter
38 SCU100 INSITE PRO M COMPACT USER MANUAL
To Next Page
Loading...
