Special tools
The following table specifies the special tools required during several of the service
procedures. The tools may be ordered separately and are also specified directly
in concerned instructions.
Article no.QtyDescription
3HAC7035-1Lower arm fixture
3HAC023081-001Pressing, link
3HAC023079-001Pressing, outer ring on link
6369901-438KM7 socket
StandardKM8 socket
StandardKM10 socket
3HAC023739-001KM12 socket extended
3HAC023132-001Pinion crank
3HAC072616-001Press tool, support ring
3HAC023092-001Pressing, lower arm/balancing weight
3HAC023084-001Pressing, upper arm
3HAC5021-1Pressing, tie rod
3HAC023080-001Pressing, tilt house
3HAC023075-001Pressing, outer ring, tilt house
3HAC5275-1Auxiliary shaft, long
3HAC5276-1Auxiliary shaft, short
3HAC5281-1Support shaft/bearing race
3HAC022436-001Axis 1 pinion
3HAC5222-1Tool for lubrication
3HAC071308-001Adapter for shaft axis 3
3HAC14446-1Guide sleeves
350 Product manual - IRB 660
3HAC025755-001 Revision: W
© Copyright 2006-2020 ABB. All rights reserved.
7 Reference information
7.7 Special tools
Continued
To Next Page
Loading...
