ABB ProcessMaster User Manual

Mounting
CI/FEX300/FEX500-EN FEX300, FEX500 EN - 19
Meter size DN Nominal
pressure
Max. tightening torque [Nm]
Hard/soft rubber lining ETFE lining mm Inch PN
Steel flange Stainless steel
flange
Steel flange Stainless steel
flange
PN10 391.7 304.2 On request On request
PN16 646.4 511.8 On request On request
PN25 1358 1087 On request On request
CL150 410.8 380.9 493.3 380.9
800 32“
CL300 2187 On request On request On request
PN10 387.7 296.3 On request On request
PN16 680.8 537.3 On request On request
PN25 1399 1119 On request On request
CL150 336.2 394.6 511 458.5
900 36“
CL300 1972 On request On request On request
PN10 541.3 419.2 On request On request
PN16 955.5 756.1 On request On request
PN25 2006 1612 On request On request
CL150 654.2 598.8 650.6 385.1
1000 40“
CL300 2181 On request On request On request
CL150 749.1 682.6 741.3 345.9
1100 44“
CL300 2607 On request On request On request
PN 6 363.5 On request - -
PN10 705.9 On request - -
PN16 1464 On request - -
CL150 815.3 731.6 - -
1200 48“
CL300 3300 On request - -
CL150 1036 983.7 - -
1350 54“
CL300 5624 On request - -
PN 6 515 On request - -
PN10 956.3 On request - -
1400 56“
PN16 1558 On request - -
CL150 1284 1166 - -
1500 60“
CL300 6139 On request - -
PN 6 570.7 On request - -
PN10 1215 On request - -
1600 64“
PN16 2171 On request - -
PN 6 708.2 On request - -
PN10 1492 On request - -
1800 72“
PN16 2398 On request - -
PN 6 857.9 On request - -
PN10 1840 On request - -
2000 80“
PN16 2860 On request - -

ABB ProcessMaster Specifications

General

Type	Electromagnetic Flowmeter
Liner Material	PTFE, PFA, Polyurethane, Rubber
Electrode Material	Stainless steel, Hastelloy, Tantalum, Titanium, Platinum
Process Connection	Flange, Wafer
Fluid Temperature	-40 to 180 °C (-40 to 356 °F) Depending on liner
Output	4-20 mA, HART, PROFIBUS PA, FOUNDATION Fieldbus
Power Supply	100 to 230 V AC, 24 V AC/DC
Protection Class	IP67
Approvals	ATEX, IECEx, FM, CSA